Table 4 Materials for fabricating the three sample spools
From: Resource-loaded piping spool fabrication scheduling: material-supply-driven optimization
Activity ID | Activity name | Required material | |
|---|---|---|---|
Name | Quantity | ||
A1 | Fit 2″ elbow and 2″ flange | 2″ elbow | 1 |
2″ Flange | 1 | ||
C1 | Fit the sub1_1 with 2″ pipe | 2″ pipe | 1 meter |
E1 | Fit sub1_2 with olet | Olet | 1 |
G1 | Fit two 6″ pipes together | 6″ pipe | 12.1meter |
A2 | Fit 6″ elbow with 6″ pipe | 6″ elbow | 2 |
6″ pipe | 0.6 meter | ||
C2 | Fit sub2_1 with 6″ pipe | 6″ pipe | 5.8 meter |
A3 | Fit 6″ hydro pipe and 6″ elbow | 6″ hydro pipe | 1 |
6″ elbow | 1 | ||
C3 | Fit 6″ elbow and 6″ pipe | 6″ elbow | 1 |
6″ pipe | 0.6 meter | ||
G3 | Fit 6″ pipe and tee | 6″ pipe | 2.7 meter |
Tee | 1 | ||
I3 | Fit sub3_4 and reducer | 6″ × 3″ reducer | 1 |
K3 | Fit sub3_5 and 3″ pipe | 3″ pipe | 1.3 meter |
M3 | Fit sub3_6 and 3″ Flange | 3″ Flange | 1 |
O3 | Fit sub3_3 and 6″ pipe | 6″ pipe | 0.6 meter |